triple pass copper cpu liquid cooler

triple pass copper cpu liquid cooler -Copper fin&brass tube -3-pass, single row -RoHS approved -G1/4 or G3/8 ports

 triple pass copper cpu liquid cooler  

Specification

Dimensions	160×125 × 62mm (W×D×H)
Weight	705g
FPI (Fins per inch)	10
Materials	Copper fins, brass tubes and stainless steel panel
Flat tube	3×12 sets 240× 16 × 2mm (W × D × H)
Fin	13 sets 50 × 7mm (D×H)  5mm spacing
Colour	Matt black
Surface	Black acrylic paint, matt finish
Certification	RoHS
Ports	2 × G1/4’’(ID≈11.4mm) or G3/8’’(ID≈15mm) as your requirement
Included	30mm and 6mm 6-32 UNC screws

Quality assurance: all radiators are cleaned to remove solder flux as well as pressure-tested for leaks.

Features

3-pass, single row construction greatly improving the heat dissipation performance High performance cooling at moderate noise levelsBoth hydraulic and pneumatic tests(1.5 bar) to ensure the good function of brass plenum chambers2 options of the ports-G1/4'' or G3/8'' to meet your requirement

Support

- Installation derection

Vertical (inlet/ outlet at top): advisedVertical (upside-down): not advisedOn both sides: advisedHorizontal (either side): advised

- Installation precaution

If you use only a fan with 25 mm height, please use 30 mm long UNC6-32 screwsAlways double-check the screw length before installation, or you might poke a hole in the radiator water channels120mm × 120mm fans are advised to be installed with the radiator

Usage

The radiator could not only be used in CPUs, but also in medical or cosmetic devices, engines or any high-power machines.